Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

Reports

LBS - Report 1) appurtenance properties and 2) material properties

Report 1) appurtenance properties such as geometry data and 2) material properties chosen for appurtenances. Those are properties defined under Appurtenance and Materials libraries.
10 days ago in OpenRail Designer / Reports Future consideration

Geometry report to report existing elevation

Today we must do a station offset report in order to get existing elevation from the active terrain model. It is even not possible anymore (2026) to use the alignment as the baseline and the offset feature.The basic horizontal geometry report shou...
18 days ago in OpenRail Designer / OpenRoads Designer / Reports Future consideration

Cross slope report between 2 lines and station referenced to base line

Station Offset/Base report gives report for two lines separately for cross slope evaluation w.r.t base line reference, but keeping station of base line i want to evaluate cross slope between inner edge and outer edge that makes more sensible for c...
13 days ago in OpenRoads Designer / Reports Future consideration

ORD Seeding Reports Like GEOPAK

Ohio DOT would like the ability to create Seeding Reports like those that could be generated within GEOPAK from the cross section candidate elements (or components) with their end width (slope lengths) including similar options that GEOPAK offered...
about 3 years ago in OpenRoads Designer / Reports Future consideration

Quantities of civil elements by named boundary

Long linear elements such as pavement marking and guardrail can be reported on by named boundaries if they are clipped according to the named boundary group. Summary of quantities on plans are often tabulated by sheet. The best methodology for thi...
5 months ago in OpenRoads Designer / Reports Future consideration

Allow importing of Reports from an excel file, similar to Item Types.

I would like the ability to create a report definition via some other method and import it in, similar to the functionality that exists for Item Types. I assume Excel, but it doesn't have to be. Once I found out I can import Item Types from an Exc...
18 days ago in OpenRoads Designer / Reports Future consideration

LEAP Bridge Steel, adding a user defined POI under Camber Diagram

Allow user defined point of interest (POI) under Camber Diagram report of LEAP Bridge Steel
25 days ago in OpenBridge Designer / Reports Future consideration

To add a note regarding LRFD-9 STM changes in output results report

CS0152823 "This user is suggesting to add a note that our STM analysis and design method is based on which AASHTO Code edition. " To add a note regarding LRFD-9 STM changes in output results report
3 months ago in OpenBridge Designer / Reports Future consideration

LEAP Steel Compact Reports

The output reports for a bridge in Leap Bridge Steel is thousands of pages of poorly optimized tables. I have used other software (including LEAP Bridge Concrete, Merlin DASH, etc.) that provide a lot of the same necessary information with much mo...
3 months ago in OpenBridge Designer / Reports Future consideration

SuperelevationToCSV.xsl does not export non-linear curve lengths

The Superelevation Report (SuperelevationToCSV.xsl) produces superelevation control lines without parabolic curves at transitions because the stylesheet is not coded to export Non-Linear Curve Lengths. Additionally, it is NOT currently possible fo...
3 months ago in OpenRoads Designer / Reports / Superelevation Future consideration