Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

Superelevation

Showing 21 of 1407

Allow Parametric Constraints to Override Rollover Slope

As an OpenRoads Designer user, I want parametric constraints to be allowed to override Rollover slopes to make it easier to apply constraints to the corridor and template models.
12 months ago in Modeling / OpenRail Designer / OpenRoads Designer / Superelevation 1 Future consideration

Superelevation Reassign

Similar to the ability we have to redefine geometry and reassign corridors (like Complex Redefine or Corridor Reattach), a Superelevation Reassign tool would be very useful. For example, if we are evaluating 2 different alignments/profiles and wou...
12 months ago in OpenRail Designer / OpenRoads Designer / Superelevation 1 Future consideration

Ability for Superelevation Lanes to use Crossfall between Linear Features to define superelevation

In many circumstances superelevation cannot be easily defined by superelevation points, i.e. tie-ins to existing crossfall, extension of adjacent carriageway crossfalls, eg. ramps, intersections, etc. In these circumstances users need to use linea...
about 2 years ago in OpenBridge Modeler / OpenRoads Designer / Superelevation 0 Future consideration

Superelevation lanes have start and end points by default in tangents

Currently if you place a superelevation lane on a tangent alignment, no points will show up in the superelevation editor. I would like that automatically even in tangent sections, the start and end points are placed in the superelevation editor so...
8 months ago in OpenRoads Designer / Superelevation 0 Future consideration

Apply superelevation to Linear Templates

I have built a civil cell using linear templates. The civil cell will need to have superelevation applied to it. Currently I cannot apply superelevation to the linear templates, and I cannot use a corridor within my civil cell without other issues...
6 months ago in OpenRoads Designer / Superelevation 0 Future consideration

Label all the points in a superelevation section with Civil Labeler

Superelevation is a tabular note that goes on the general info sheet with the super elevation diagram, so we usually just fill out the info in that tabular note. Designers just blow up the tabular note to add lines and make it work per project. If...
over 1 year ago in Annotation / OpenRail Designer / OpenRoads Designer / Superelevation 0 Future consideration

Ability to Customize Superelevation Colors

As a highway designer I want the ability to customize the colors used for the superelevations.
about 1 year ago in OpenRoads Designer / Superelevation 0 Future consideration

Allow Lanes in Superelevation Model View to take on the colors used in Superelevation Editor

This will help users more easily differentiate between lanes while in the Superelevation Model.
about 2 years ago in OpenRail Designer / OpenRoads Designer / Superelevation 0 Future consideration

Allow superelevation lanes to follow a separate control line

In the old Geopak we could create superelevation shapes to follow a profile grade line (we called this a "PGL Chain". In locations where the lanes transition offset, this helped us to see that the lanes transitioned offset while still following st...
about 2 years ago in OpenRail Designer / OpenRoads Designer / Superelevation 0 Future consideration

Ability to Report on and See Superelevation Info When Referenced

I would like to see the following capabilities added for use when a superelevation file is attached as a reference: The ability to generate a superelevation report. The ability to see the control lines (obviously read-only). Basically, it would be...
over 1 year ago in Superelevation 1 Already exists