The Superelevation Report (SuperelevationToCSV.xsl) produces superelevation control lines without parabolic curves at transitions because the stylesheet is not coded to export Non-Linear Curve Lengths. Additionally, it is NOT currently possible fo...

Please consider on cant creation using a default of zero for all cant levels. he cant it automates is never correct and a zero default is a better base for me to start my cant input from calcs. If you are going to automated values they should be i...

Providing a toggle to control the automatic recalculation of superelevation values when the alignment it is dependent on is revised will help limit re-work needed to customize the superelevation values for a project. Exporting and reimporting supe...

In the Superelevation Editor, being able to add a point of reverse curvature on reverse parabolic transitions will help when trying to manually define/adjust points of 0% cross slope.

In the Superelevation Editor, adding a "crown removed" option to the Point Type list would help when trying to manually define/adjust anywhere there is 0% cross slope.

I have built a civil cell using linear templates. The civil cell will need to have superelevation applied to it. Currently I cannot apply superelevation to the linear templates, and I cannot use a corridor within my civil cell without other issues...

Please consider the following enhancements for the profile frame annotation which is currently difficult to understand and lacks important functionality: Preview window should display an example superelevation diagram instead of remaining blank an...

Currently, the graphic representing the superelevation section is hard coded to use the radius of the smallest curve in the alignment. If the radius of the smallest curve is 50 meters or more, the section width is hard-coded to 50 meters. If t...

Currently if you place a superelevation lane on a tangent alignment, no points will show up in the superelevation editor. I would like that automatically even in tangent sections, the start and end points are placed in the superelevation editor so...

I would like to request a feature that prevents or warns about applying transitions to lanes that go beyond the station limit of the superelevation section when using the “Import Superelevation” tool. This is because this situation can cause poten...