The current order of OBM’s Place Bearing groups is creating significant confusion regarding which item group corresponds to the Bearing and Grout Pad/Bevel Plate. Because the group order changes depending on configuration, the same physical compon...

Geopak is no longer supported by Bentley. At some point, Geopak will not be installed on our machines, but we may need to get the calculations that reside in the GDF file. We need a method that will allow us to extract the information we need from...

OBM does not currently allow for bent connection plates for diaphragms / cross frames. We need that ability to cover bridges skewed between 20 and 45 degrees.

My state agency commonly uses gutters with a 4% cross slope. The maximum superelevation rate is 7%. The gutter slope stays at 4% in this situation. Spread does not compute in this scenario because "A depressed gutter must have a Gutter Cross Slope...

Ohio DOT likes to see the spread and depth at the edge of the grate. Currently the software reports on the spread and depth at the start and end of the gutter. Would like additional properties to also report the spread and depth at the edge of the...

We receive the rail alignment in the form of a .xtr file. In the file itself it is possible to see that there is station, cant, construction and destruction phase, and turnout information, yet when I import it in OpenRail Designer only the alignem...

There should be a one button command to convert a Survey Linear to a Civil Geometry Complex Element, a MicroStation Linestring, or individual MicroStation lines (User picks what they want). There are ways to accomplish this process now but most in...

When Switching between state of a Structure Existing and Proposed, Removed, Etc. we need a way to keep the same Feature we should be able to Either Map to a property to choose the Level to Display or be able to overwrite the Level Via Display Style.

Users currently need to always start with a 3D file in OBM unlike in ORD. Allow users to support the multi-model (2D and 3D) behavior similar to OpenRoads Designer. All decorations should be in the 2D file and all 3D objects in the 3D file. When s...

This is a must have feature for precast bridges.