Need Support? Let’s guide you to the right answer or agent.

OpenSite Ideas Portal

ADD A NEW IDEA

Applications

Showing 98

Option to add support settlement to Leap Concrete & Leap Steel

Differential support settlement can create additional internal forces in beams. Right now there is no option to account for those forces.
15 days ago in OpenBridge Designer 0 Needs review

More types of bridges needed

The software is capable of quickly performing conceptual design, but currently supports very few bridge types, which cannot meet the needs for scheme presentation. Could you please add cable-stayed bridges, and suspension bridges? Also, provide se...
22 days ago in OpenRail ConceptStation / OpenRoads ConceptStation 0 Needs review

Modify the LLS part when placing a turnout.

Currently one could add an LLS part on a turnout. Unfortunately this is a standard value. Sometimes, when creating a horizontal geometry, it is necessary to ''shorten'' the LLS part (aka to place a fewer amount of long sleepers that a standard LLS...
27 days ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

Create a tool that constructs transitions between different types of rail sections

Sometimes in track design, one must use different types of rails, say 60kg and 50kg rails. One could weld them and grind them together but this is a crude method. In Sweden they use what is called a transition rail, which in principle contain a sm...
27 days ago in Modeling / OpenRail Designer 0 Needs review

Designing Geometry using multiple spiral type

Currently we can set up one spiral type for one DGN. If the geometry needs to be designed using different spiral type, we need the flexibility to allow the application of multiple spiral type in one DGN
29 days ago in Geometry / OpenRail Designer 0 Needs review

Measure rail interval similar to Pro Rail extension

In Bentley Rail Track, there was an extension called Pro Rail that allows users to measure the interval between rail dynamically. Right now, we are able to report that using Station-Offset report but we are not able to track it which makes it chal...
29 days ago in OpenRail Designer 0 Needs review

Verify Turnout

Use the Geometry Connector with start and end elements chosen as turnouts. The converged result gives a disconnection between the regression alignment and the turnout. You can only discover it by zooming in to the closest possible view. A "Verify ...
about 2 months ago in OpenRail Designer / Turnouts/Crossings 0 Needs review

When exporting to the IFC, keep a different identification for each item.

When exporting the IFC, each element is identified by a default value. For example, all solids come out with an identification as smartsolid. This makes it very difficult to search for an element in the model.
about 2 months ago in Import/Export / OpenBridge Modeler / OpenRail Designer / OpenRoads Designer 3 Needs review

Analyze Point improvement to display slope in a vertical radius.

It is often necessary to check the slope in a specific point/section of a vertical curve, but this cannot be done right now with the "Analyze Point" tool. No matter where on the alignment I click the slope that displays is the slope of the first v...
2 months ago in Geometry / OpenRail Designer / OpenRoads Designer 1 Needs review

Break decks into sections

Usually, the bridge deck of a precast beam is an integral unit per span. In actual construction, the bridge deck may be constructed in sections for each beam. Is it possible to break the bridge deck into sections for each beam, and further divide ...
2 months ago in OpenBridge Modeler 0 Needs review