At the moment, only shared cells are supported.

An input report should be made available to LARS files similar to the input report generated in LEAP Steel. This allows for a more efficient process for QA/QC of load rating files. This ability was present in LARS v10, but removed in the modernize...

Add an option to get camber given at 10th points on the clbrg span instead of the precast span. beams are being set at a certain elevation at CLBRG so the camber up from CLBRG is what we need to design geometry around, not camber up from end of pr...

Suggest making California design for abutments on LEAP to follow this Live Load Distribution memo. All abutments in California must be designed using the following Live Load Distribution method or it would not be acceptable per Caltrans standards....

Right now in our plan and profile drawing seed files, we can only anchor a clip boundary from its left-most point. This works if users always place the same linear distance on each sheet, but if the user wants to vary the project length shown on e...

Want: Objects in model would highlight when selected through the project explorer Why: if you have multiple objects say terrains, and you need to modify them, it would be very helpful to see them highlighted through the project explorer. Often tim...

OBM should incorporate a Bridge Objects utility similar to the Corridor Objects in ORD. Having to go back and forth between the Explorer and the Properties panes is a clunky and inefficient workflow especially when you're typically accessing an ob...

The ability to create a straight bridge when the alignment transitions from tangent to a horizontal curve on the bridge. Currently the deck ends are controlled by the bridge skew from a radial line at the end of the deck rather than from the tange...

Tool names need to be consistent everywhere. If you go to the tool called "Direction", the tool that opens up looks to have a name of "Change Curve Direction" as the title. if you open to tool called "Coordinate System", the title of the dialog th...

The ability to copy plan drawings from a different file to have the same boundaries for different disciplines and you are able to edit named boundaries in each separate discipline. In summary the named boundaries start the same but they are indepe...