When laying out watermain pipes the bends can be 45 degrees, 22.5 degrees, etc. These bends are modeled as nodes in our workspace so we can report of them and display them in our drawings. If the angle of the pipe adjusts, we want the node feature...

In Geopak Drainage, once you place a node and attached a catchment, you were able to see inlet calculations. This let the user know if they needed to shift the box to have an allowable spread. It would be great if we could get that feedback withou...

Geopak is no longer supported by Bentley. At some point, Geopak will not be installed on our machines, but we may need to get the calculations that reside in the GDF file. We need a method that will allow us to extract the information we need from...

Trench templates are used on pipes for fill quantities. It would be useful if you could place a trench that would automatically assign parametric constraints based on the size and pipe thickness of the pipes. Also, shapes other than a circle are d...

It would be very helpful if ORD drainage model calculates the velocity and normal depth in the gutter- especially when we use gutter as a user defined gutter/channel in the medians to analyze median channel.

I would like the ability to control the limits of the profile run in profile sheets which would also allow me to control the stationing without having to create a separate alignment and project the drainage run into the separate alignment.

Pipe standards vary their minimum and maximum pipe cover values based on the size of the pipes. There needs to be an ability to set this per conduit size so that when running a design you can consider these different cover depths. As of now, you w...

A catchment's subareas is ONLY accessible by opening the subareas collection. This limits the ability to streamline various workflows. At minimum sub areas need to be accessible from the following: Flex Tables - The current flex tables will only...

We would like to be able to set up annotation groups to annotate the invert and/or crown elevations of a conduit along its length using set station intervals. Currently, there are only start/end invert/crown elevation text favorite fields.

We are now 10 years into OpenRoads. Why are we still faced with two property panels. One for MicroStation and one for Utility/drainage. The two property panels overlap in what is displayed. ELIMINATE the Utility Properties Panel so we can end the ...