The application (ProConcrete standalone/ProConcrete within OBM/Rebar Modeler in OBM 2026) only allows selection of a schedule generator template from a local drive. When the user tries to create rebar schedules using Schedule Generator, clicking t...

I have been working with a long bridge with a SE transition. It is a little over 1,000 feet long and there are varying flange thicknesses along each girder. Each girder is different. In other words, that is a lot of data entry. OBM does not like s...

The current order of OBM’s Place Bearing groups is creating significant confusion regarding which item group corresponds to the Bearing and Grout Pad/Bevel Plate. Because the group order changes depending on configuration, the same physical compon...

Current Rebar data can be saved as an MDB or an RDX file. Our rebar fabricators in Michigan are using aSa software that requires rdx files that are version 2.0 or above. OBM/ProConcrete is still producing RDX Version 1.3 files. These cannot be imp...

Add OpenRoads Designer Civil functions to Python integration allowing development of Python applications that can access/call the Civil Design processes within OpenRoads

Some states require the top of the abutment cap to slope away from the backwall while the seat build-up remain level.

Currently is you have a cross slope transition start or end outside the deck limits you have to calculate what the cross slope is at the deck limits. It would be helpful if you could just enter the start and stop station of the transition.

1)CS0179668 Currently when we do profile view drawings we are creating a section cut with depth zero using the alignment as reference. When we have curved bridge in plan or a even number of girders, the cut doesn't show the girders because they ar...

Currently, the only way to update Annotation is to update ALL or one drawing model at a time. It would be very helpful to be able to select a station range to remove and then update in one action.

Our bridges are designed with a haunched (or angled) soffit at the outside edges of the deck. These extend from the outside edge of the deck down to the top of the outside girder flange. Right now, this can be fudged in a deck template on a straig...