The current order of OBM’s Place Bearing groups is creating significant confusion regarding which item group corresponds to the Bearing and Grout Pad/Bevel Plate. Because the group order changes depending on configuration, the same physical compon...

OBM does not currently allow for bent connection plates for diaphragms / cross frames. We need that ability to cover bridges skewed between 20 and 45 degrees.

Currently, the material options for the Bolt Material in the field splice library pulls from the Miscellaneous tab of the material library. It would be good if this pulled from the steel tab as that is where we put the steel bolt material pay items

Add OpenRoads Designer Civil functions to Python integration allowing development of Python applications that can access/call the Civil Design processes within OpenRoads

OBM is limited in the cap shapes it can accommodate currently. It would be very helpful if we had the ability to draw cap shapes in the front elevation view and use those as templates, which OBM extrudes in the up/downstation direction. We would l...

It would be very helpful if it were possible to load DGNLIB files on demand instead of automatically. One example of this is Sheet Seed DGNLIB files. We do not need those unless we are creating sheets, and creating sheets is a very, very small por...

Our bridges are designed with a haunched (or angled) soffit at the outside edges of the deck. These extend from the outside edge of the deck down to the top of the outside girder flange. Right now, this can be fudged in a deck template on a straig...

1)CS0179668 Currently when we do profile view drawings we are creating a section cut with depth zero using the alignment as reference. When we have curved bridge in plan or a even number of girders, the cut doesn't show the girders because they ar...

When annotating elements using an affix (prefix or suffix) tied to a Text Favorite, OpenRoads currently annotates the affix even if the Text Favorite evaluates to a blank or null value. This results in: Stray symbols, separators, or units (e.g.,...

Currently, the only way to update Annotation is to update ALL or one drawing model at a time. It would be very helpful to be able to select a station range to remove and then update in one action.