It would be very useful to have the possibility to create a negative back batter (narrow bottom) for an abutment, since currently the back batter can only be positive (wider bottom).

There are many circumstances where the same Deck Template point needs to be Point Controlled onto multiple linear features. Currently the user needs to either create multiple decks/support lines or create Geometry that traces the original and join...

Special Node/Option for Full recognition (reading civil information) and creation of Feature Definitions in GenerativeComponents. GC & Civil Packages would benefit greatly if we could automate the creation of Civil Lines (2D/3D) for subsequen...

Useful to see the prestressing strands from the design products (LEAP & RM) back in OBM

Currently OBM requires atleast two beams in the beam layout. Users working on bridge expansion projects, or with rail bridges have requested allowing bridges with a single beam.

Similar to the custom tools for available for stiffeners and cross frames for steel built up or rolled shape beams, OBM needs to add tools for adding these to steel tub/U beams

The current beam hog modeling behavior is not as expected. While deck thickening can be applied, the supporting beams remain straight and do not conform to the underside profile of the deck. In reality, the beams should follow the curved shape of ...

LBS V22.00.02.19CS0035224 Service Case 1233802: [CS0035224] The fatigue stress range calculation doesn’t follow as per AASHTO Table 6.6.1.2.3-1, Section 7.2 Product Backlog Item 1233801: (VM):LBS:V22:The fatigue stress range calculation doesn’t fo...

I am attempting to model a 3 span concrete slab bridge with thickened haunches over the supports. I am using a typical deck template. My thickness variations are shown in the first attachment. The Bridge has a 10 degree skew angle at the supports....

On very large projects with hundreds of people working on the project and you need to change a standard you should not have to go thru all of the dgns in the project to update or purge old standards. Most of the time the standards evolve as the pr...