Need Support? Let’s guide you to the right answer or agent.

OpenSite Ideas Portal

ADD A NEW IDEA

All ideas

Showing 1394 of 1394

Include OpenRoads Designer Standards (Feature Definitions, Symbologies, Annotation Groups etc.) When Importing Feature Definition .dgnlib into another design model

It would be very helpful if "All" the OpenRoads Designer Standards (Feature Definitions, Symbologies, Annotation Groups etc.) would come through when Importing a Feature Definition .dgnlib into another design model. Currently, if you import one mo...
about 2 years ago in Import/Export 0 Future consideration

Place one bearing at pier location for continuous span concrete girder bridge design

Ability to place only one bearing at pier location for continuous span concrete girder bridge design, two girders shearing one bearing at pier location.
about 2 years ago in OpenBridge Designer / OpenBridge Modeler 0 Needs review

Modeling horizontal bracing for steel girder bridge

I believe OpenBridge modeler missing function to place horizontal bracing between girders (angle or CHS member) CHS preferable.
about 2 years ago in OpenBridge Designer / OpenBridge Modeler 0 Needs review

Text Favorite: add Dynamic N,E,S,W preffix for MH labels

Add ability to have dynamic direction- N,E,S,W preffix in the label for MH labels Text Favorites. In Auto CAD the option is called "pipe direction". Following is the example of output required. (S) INV 99.8m (N) INV 99.7M
about 2 years ago in Annotation 0 Future consideration

Update "Coordinate Grid" tool to allow more options

The "Coordinate Grid" tool needs to be updated to provide more options of the coordinate text placement allowing offsets & rotation etc. There should be, at a minimum, the same amount of control as we had with the InRoads tool "Place Coordinat...
over 1 year ago in Annotation / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Create corridor from reference feature

Our current standard workflow for roadway corridor modeling is to create a pavement corridor then a corridor for each end condition Rt and Lt. I have seen many others including some Bentley folks use this method. It would be big time saver to have...
about 2 years ago in Modeling / OpenRail Designer / OpenRoads Designer 2 Future consideration

Geometry - Copy Chain Parallel Command

There was a command in Geopak called Copy Chai n Parallel that was very useful in creating offsets of survey chains, and creating new points at constant delta elevations. We are looking for the same function to be added in OpenRoads Designer.
about 2 years ago in Geometry / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Already exists

Allow member groups to start and stop at the same support line in LBS

We are modeling a complex bridge in LBS and the bridge is flared. The flare has required the addition of shorter beams that are not full length to keep the beam spacing on the flared end reasonable. Currently LBS does not allow more than one beam ...
over 1 year ago in Modeling / OpenBridge Designer / OpenBridge Modeler 0 Needs review

Bridge centerline

It will be very helpful if OBM can project the deck centerline along the length of the bridge.
over 1 year ago in OpenBridge Designer / OpenBridge Modeler 0 Needs review

Ability for Corridor Horizontal Parametric Constraints to be applied with Reverse Cubic Curves

In our legacy software we could quickly and easily apply a reverse cubic curve tapers for our designs without having to create Geometry and have our lane edges follow that - noting that the Geometry is not actually the required reverse cubic curva...
about 2 years ago in OpenRoads Designer 0 Future consideration