Skip to Main Content
Need Support? Let’s guide you to the right answer or agent.
ADD A NEW IDEA

All ideas

Exported TIN surface must carry same edge method on importing.

Exported surface in TIN format not keeping the same edge method while importing it in new .dgn file. So, it is expected to get such functionality where the exported surface should carry the same edge method or while importing any surface it should...

Enhancement to Auto Update Field Codes on Point Features when Field Code on Linear Feature is Updated

If a user changes a linear feature code, the expectation would be to also see the feature codes on the points that make up that linear feature change accordingly (if the linear feature was dependent on these points features and the appropriate lin...
over 2 years ago in OpenRail Designer / OpenRoads Designer / OpenSite Designer / Survey 0 Planned

Variable Cross slope by station outside of deck limits

Currently is you have a cross slope transition start or end outside the deck limits you have to calculate what the cross slope is at the deck limits. It would be helpful if you could just enter the start and stop station of the transition.
4 months ago in OpenBridge Modeler 0 Future consideration

The Parametric Constraints dialog can't be resized.

Point control and parametric constraint dialogues cannot be resized for longer point/string names.
4 months ago in OpenRoads Designer / User Interface 0 Future consideration

Allow stepped cap beam seats to be placed parallel to the girder on a skew.

Allow each girder step to be placed parallel to the girder not perpendicular to abutment skew. For ITD it's common practice to have the cap steps be center between girder centerlines parallel.
6 months ago in Modeling / OpenBridge Modeler 0 Planned

Re-associate turnout to an alignment

When you create a new alignment, break a alignment and lose the turnouts or import a geometry it would be good to be able to re-associate or change the alignment to which a turnout are associated/connected to.For instance when I´m working with a c...
almost 4 years ago in OpenRail Designer / Turnouts/Crossings 1 Planned

Bridge deck breakback variant

Add a variant to the deck breakback that allows you to adjust the angle from the break point or add a deck variant that lets you set a distance from face of backwall which would automatically set your breakbacks without the need to give a distance...
10 months ago in OpenBridge Modeler 0 Future consideration

Addition of Steel Bridge Templates into ConceptStation

ConceptStation needs Steel Bridge Templates as some regions predominantly utilize these types of bridges. Lack of steel bridge templates create a barrier for adoption of ConceptStation.
8 months ago in OpenRoads ConceptStation 0 Future consideration

Add Dynamics / Rules to Meshes produced by Create Closed Mesh Tool

Currently the Create Closed Mesh Tool produces static meshes which do not update when base elements change. When any of the base elements change, the existing meshes need to be deleted and created from scratch. We would like to see the following i...
over 3 years ago in Modeling 0 Future consideration

Annotate Height/Offset difference from Multiple Stratum in Cross Section

Currently, Drawing annotation for Cross Section is only available for Ground Z and (design) Z. If there are multiple stratum and terrain models, no direct option to annotate the height/offset difference from design to other stratum, or stratum (te...
over 3 years ago in Annotation / Drawing Production / OpenRail Designer / OpenRoads Designer / OpenSite Designer 1 Future consideration