Please consider adding the ability for the user to control decimals on the Line Bearing phrase calculated insert in the respective .xml when using the Deed Writer tool. Users would like to have control on the Line Bearing number of decimals. For e...

When using the SignCAD to DGN utility, the sign panel outline is obscured when the signs contain a single white border with no indentation and the fill setting enabled. To work around this, our sign designers must add an outline/no-fill shape to t...

I know if you open dynamic cross sections based off a corridor you can place temporary dimensions. but if you open a dynamic cross section based off the alignment you cannot place temporary dimension lines. I need an easy way to get what slope a g...

If an enhancement idea is identified during a case or a Blueprint session, it should be reported by the case manager or the blueprint manager, not the responsibility of the user. Crowd sourcing support for deficiencies found during one of scenario...

Pipe standards vary their minimum and maximum pipe cover values based on the size of the pipes. There needs to be an ability to set this per conduit size so that when running a design you can consider these different cover depths. As of now, you w...

It would solve confusion on the layout of the ultimate moment/min. reinforcement print outs/reports for bridge engineers.

Openroads Horizontal Geometry has lines, arcs, and circle features. Add a rectangular civil geometry element. This would be used for site grading (building pad), instead of drawing 4 individual civil geometry lines and complexing together, a recta...

Currently sight distance analysis results are purely 3d extended objects that only offers a limited amount of functionality to determine visually why a failure is occurring. Adding 2d geometry representation to these objects would allow users to p...

Need to be able to dimension Surface templ ates in the dynamic cross section view during design as well as XS Drawing Models for plans productions. Could do it in InRoads.

In 10.11 R1 (10.11.00.115), the profile projection icon under the OpenRoads Model tab changes when the projection’s source reference file is detached. Once you detach the reference the profile projection loses its civil rule, thus the icon changes...