Need Support? Let’s guide you to the right answer or agent.

OpenSite Ideas Portal

ADD A NEW IDEA

All ideas

Showing 1283 of 1283

Profile Symbology Setting

Currently OpenRail does not have the ability to assign profile symboligies for Turnouts with the Turnout Feature Definition.
almost 2 years ago in Geometry / OpenRail Designer / Turnouts/Crossings 0 Future consideration

Show Projected 3D Cuts when using the Project Run Tool

If we project the profile runs to centerline, we lose the ability to show the utility crossings generated by the 3D cut at the pipe centerline. We can add a 3D cut at the road centerline, but often the crossing utilities are not in the same locati...
about 2 years ago in Drainage and Utilities / OpenRoads Designer 0 Future consideration

Superelevation Rounding

Can there be added functionality to force rounding up rather than just being a standard rounding of what is set in the superelevation file editor? As it sits currently, if your rounding is set to 1, if a curve meets a value between 0 and .5 the su...
9 months ago in OpenRoads Designer / Superelevation 0 Future consideration

Curve Set Intersection Point

Need a property for the intersection point of a Curve Set. e.g. Plan Annotation.Curve Set IP
9 months ago in Annotation / Geometry / OpenRail Designer / OpenRoads Designer 0 Future consideration

Coupling between horizontal and vertical regrerssion lines

A very problematic area is the coupling between horizontal and vertical regression analysis. Generally speaking, one must create a horizontal regression line first, create regressed elements, couple them together in a complex geometry and then pro...
over 1 year ago in OpenRail Designer / Regression Analysis 0 Future consideration

Add ability to Target Alias and clip a Conical Slope

The conical slope feature is very useful for model detailing. We use these often at bridge abutments. It would be helpful if we could target alias these features and also clip them.
about 2 years ago in Modeling / OpenBridge Designer / OpenBridge Modeler / OpenRail Designer / OpenRoads Designer 0 Future consideration

Annotation of 3D features only on Xsection

It is usual request to annotate 3D features on cross sections. At point or in frame. It does work when feature is 2D+3D but not if feature is 3D only. That is commong with existing ground and more and more with modelling using linear features (wit...
about 1 year ago in Annotation / OpenRail Designer / OpenRoads Designer / OpenSite Designer 0 Future consideration

Cant graphics in plan: more differentiate

It would be great to be able to better distinguish the existing graphics of cant representation in a plan. Today, the cant graphics is overlapped.
9 months ago in CANT 1 Planned

Turnout in exportable file

It would be very useful to have a way of bringing geometry including turnouts between models i.e. as in the .alg files. Rather than having to use a dgn. With large alignment files, they are a lot more manageable/faster when split into smaller sect...
about 2 years ago in Geometry / Import/Export / OpenRail Designer 1 Future consideration

Allow cut and fill meshes to be created by named boundary

When creating cut and fill meshes in ORD it creates the meshes for the entire design file. This applies a feature definition for both the cut and fill meshes that only allow for one applied shrink/swell rate. It would be helpful to be able to appl...
almost 2 years ago in OpenRoads Designer 0 Future consideration